Swing Gate Operators


UNDERGROUND ACTUATORS FOR SWING GATES

The ELVOX hidden electromechanical actuators are the most practical und unobtrusive devices for attractive gates. The reduction unit is located inside a very thick, strong aluminium body able to withstand substantial loads and stress. They are fitted with low voltage 12 V D.C. motors for absolute safety. They can even be used during temporary mains power failure thanks to the special ELVOX electronic control unit which can be driven by standard battery. A foundation box is also available to house the automatic system. This allows the site to be prepared and the gate to be installed before the actuator is fitted.

ZI26 – 12V D.C. non-reversible underground actuator for swing gate up to 200kg and 1.8 m

ZI27 – 12V D.C. non-reversible underground actuator for swing gate from 1.8 m (400 kg) up to 4 m (200 kg).

ZX41 – Foundation box in galvanised steel for underground actuators type ZI26 and ZI27. (Dimensions WxHxD: 555x138x174 mm)

ZX41/I – Foundation box in stainless steel for underground actuators type ZI26 and ZI27. (Dimensions WxHxD: 555x138x174 mm)

Technical specifications
ZI26 ZI27
Motor supply voltage (V D.C.) 12 12
Power rating (W) 30 40
Motor speed (RPM) 1000 1200
IP degree IP67 IP67
Maximum leaf length (m) 1.8 4 (200 kg)
Maximum leaf weight (kg) 200 400 (1.8 m)
Operating temperature (°C) -20÷40 -20÷40
Max. opening angle (°) 360 360
Manual unlocking ZDA7 ZDB7
Dimensions: WxHxD (mm) 380x90x140 430x90x140

N.B.:

When installing actuator type ZI26 it is also necessary to use the manual unlocking device type ZDA7 and when installing actuator type ZI27 the manual unlocking device type ZDB7.

SKU: Underground actuator for swing gate Category:

Description


UNDERGROUND ACTUATORS FOR SWING GATES

The ELVOX hidden electromechanical actuators are the most practical und unobtrusive devices for attractive gates. The reduction unit is located inside a very thick, strong aluminium body able to withstand substantial loads and stress. They are fitted with low voltage 12 V D.C. motors for absolute safety. They can even be used during temporary mains power failure thanks to the special ELVOX electronic control unit which can be driven by standard battery. A foundation box is also available to house the automatic system. This allows the site to be prepared and the gate to be installed before the actuator is fitted.

ZI26 – 12V D.C. non-reversible underground actuator for swing gate up to 200kg and 1.8 m

ZI27 – 12V D.C. non-reversible underground actuator for swing gate from 1.8 m (400 kg) up to 4 m (200 kg).

ZX41 – Foundation box in galvanised steel for underground actuators type ZI26 and ZI27. (Dimensions WxHxD: 555x138x174 mm)

ZX41/I – Foundation box in stainless steel for underground actuators type ZI26 and ZI27. (Dimensions WxHxD: 555x138x174 mm)

Technical specifications
ZI26 ZI27
Motor supply voltage (V D.C.) 12 12
Power rating (W) 30 40
Motor speed (RPM) 1000 1200
IP degree IP67 IP67
Maximum leaf length (m) 1.8 4 (200 kg)
Maximum leaf weight (kg) 200 400 (1.8 m)
Operating temperature (°C) -20÷40 -20÷40
Max. opening angle (°) 360 360
Manual unlocking ZDA7 ZDB7
Dimensions: WxHxD (mm) 380x90x140 430x90x140

N.B.:

When installing actuator type ZI26 it is also necessary to use the manual unlocking device type ZDA7 and when installing actuator type ZI27 the manual unlocking device type ZDB7.